Any Shed, Any Size

1300 951 593

Home : About Tilmac Fabricated Sheds

About Tilmac Fabricated Sheds

Did you know Tilmac fabricated (fully welded) sheds are a more cost effective solution for anyone wanting to build a medium to large shed?

The biggest advantage of a Tilmac fabricated frame shed is the simplicity of its design. The time and cost required to build your fabricated shed will ultimately cost you 5% less (or more) if you build or employ a shed builder to construct your shed compared to a C purlin frame shed. 

 


Should you choose a Tilmac Fabricated (Fully Welded) Shed?


  • Stronger, cheaper and easier to build
  • Minimal parts and fasteners
  • Less time spent erecting your shed
  • ALL brackets are fully welded to the frame  meaning that there are far less loose parts which can go missing, be supplied incorrectly & need to be bolted to the frame
  • Easy measurement and Placement
  • Rigid frame makes standing easier and less stressful. 
   

Build Right Away with a Tilmac Fabricated Shed

1. C Purlin Sheds generally have more parts and fasteners than a fabricated shed.

Tilmac fabricated sheds have all brackets and cleats welded to the frame. The only parts you require to construct your fabricated shed are the columns, rafters and end wall mullions. So no time is wasted on

  1. Figuring out what all the different brackets and parts are for
  2. Where they need to be attached
  3. Bolting the parts to the shed frame
  4. Bolting the frame together
  5. Cutting in apex and knee braces

You or your shed builder can begin standing your Tilmac Fabricated shed immediately!

2. Easy Measurement and Placement

Tilmac fabricated sheds require minimal to no measurements.   

Imagine building a large C Purlin Shed, you have to

1. Bolt base cleats to slab

2. Measure the distance from the edge of the slab to the position of the brackets which are offset by the width of the side girts

3. Measure the centers from end to end by the sheds bay size

3. Standing the frame

Tilmac fabricated Sheds are made of structural RHS steel and universal beam which provides a rigid steel frame. C purlin sheds are very unstable over large spans until fully standing and cross braced. Tilmac Fabricated shed are a lot more stable, easier to handle and less stressful to work with, especially for larger sized sheds.

So why compromise. A fabricated shed is a more economical choice for medium to large sheds plus are stronger, longer lasting and more flexible in design.